磁懸浮鼓風機要注意什么

What to pay attention to when using a magnetic levitation blower

磁懸浮鼓風機在安裝的時候，要安裝在干凈整潔的室內，安裝前應當給風機預留出足夠的空間，能夠保證空氣的正常流通，我們不建議將風機安裝在室外運行，這會對風機產生一定的損壞。

When installing the magnetic levitation blower, it should be installed in a clean and tidy indoor environment. Before installation, sufficient space should be reserved for the fan to ensure normal air circulation. We do not recommend installing the fan outdoors for operation, as it may cause certain damage to the fan.

1、周邊環境溫度

1. Surrounding environmental temperature

磁懸浮鼓風機安裝的周邊環境溫度建議在：10-45℃，如果我們的氣候環境溫度低于0攝氏度，我們建議增加供暖設備，如果周邊環境溫度常年處于35攝氏度以上，我們建議增加機房的通風，保證機房散熱暢通。

The recommended ambient temperature for the installation of the magnetic levitation blower is 10-45 ℃. If our climate environment temperature is below 0 ℃, we suggest adding heating equipment. If the ambient temperature is above 35 ℃ all year round, we suggest increasing ventilation in the computer room to ensure smooth heat dissipation.

2、安裝的海拔高度

2. Installation altitude

磁懸浮鼓風機因受制于電子器件的性能，華東風機建議大家講磁懸浮鼓風機安裝在海拔低于1000米以下的地區，如果受到海拔因素的影響，必須安裝在1000米以上，需要聽取我們技術工程師的指導意見。

Due to the performance limitations of electronic devices, Huadong Fan recommends that the magnetic levitation blower be installed in areas below 1000 meters above sea level. If it is affected by altitude factors, it must be installed above 1000 meters, and we need to listen to the guidance of our technical engineers.

3、安裝空間

3. Installation space

磁懸浮鼓風機的安裝空間要足夠，華東風機磁懸浮鼓風機有安裝圖紙，請按照圖紙給鼓風機預留出安裝空間，機房的面積大一些，還能夠降低房間回聲，降低噪音。

The installation space of the magnetic levitation blower should be sufficient. Huadong Fan has installation drawings for the magnetic levitation blower. Please reserve installation space for the blower according to the drawings. The area of the machine room should be larger, and it can also reduce room echo and noise.

4、清潔程度

4. Cleanliness level

安裝環境還必須要安裝在潔凈的場所，磁懸浮鼓風機吸入過多的灰塵，會造成過濾器使用壽命降低，導致電機發熱嚴重，并且會造成過濾器過度更換。

The installation environment must also be installed in a clean place. If the magnetic levitation blower sucks in too much dust, it will reduce the service life of the filter, cause serious motor heating, and cause excessive replacement of the filter.

5、環境濕度

5. Environmental humidity

磁懸浮鼓風機的安裝的環境濕度不能太高，濕度高的環境會造成電子元器件發生故障，所以，周邊環境濕度要低一些，避免影響電子元器件工作

The installation environment of the magnetic levitation blower should not be too humid, as high humidity can cause electronic component failures. Therefore, the humidity in the surrounding environment should be lower to avoid affecting the operation of electronic components

本文由磁懸浮鼓風機處理提供技術支持，更多的詳細精彩內容請點擊我們的網站http://m.kingwanlan.com，我們將會全心全意為您提供滿意的服務。

This article provides technical support for magnetic levitation blower processing. For more detailed and exciting content, please click on our website http://m.kingwanlan.com We will wholeheartedly provide you with satisfactory service.